EnglishРусскийazərbaycan diliБеларускаяБългарскиDanskNederlandsFrançaisDeutschPolskiRomânăSlovenščinaTürkçeУкраїнська
GTgroup.Company

HIGH QUALITY
Molds for injection molding
Any difficulties FROM CHINA
CHEAPER TO 50%

Мы производим Пресс Формы для Термопластавтоматов под Ключ

You can:

расчитать стоимость Пресс Формы

заказать изготовление Пресс Формы

получить качественную Пресс Форму

And all this with us will cost you much cheaper, and faster.

Важно!!! Если вы действительно заинтересованы в приобретении Пресс Формы для Термопластавтоматов,

then be sure to read this information below for calculating the cost of molds in our company.

Attention:

Schematic drawings in PDF format or detail photos, не подходят для расчета стоимости Пресс Формы для Термопластавтоматов. Without providing the information below, вы не сможете получить от нас расчет стоимости Пресс Формы. But if you and get all the same somewhere calculation. It is likely that you will be deceived. 21 century. GTgroup.Company is not engaged. Without providing us the requested information, it is impossible to calculate and prepare the best quotation.

Если у вас нет 3d чертежей детали для производства которой необходимо изготовление Пресс Формы. Тогда мы можем предоставить вам услугу изготовления 3d чертежей. Or translate your schematic drawings of parts into 3D.

Cost 3d modeling or transfer PDF drawings of parts into 3D format by 15000 rubles, depending on the complexity of the parts.

To do this, you can send it, что у вас имеется на наш email или через форму расчета стоимости Пресс Формы для Термопластавтоматов которая расположена ниже на нашем сайте. During the next few hours our manager will contact you to discuss further action.

Что нужно для полного и точного получения информации о сроках изготовления и стоимости Пресс Формы для Термопластавтоматов.


MANDATORY!!! know the following information:

1) Your phone number and email address for feedback.

2) Terms of Reference for the manufacture of molds.

3) Name molds (for what).

4) Type molds channel (hot runner or cold runners)

5) Material manufacturing parts necessary to you.

6) How many local mold, how many pieces Molds should make for one closure (for 1 time)

7) The annual quantity production of final parts (for the selection of steel, suitable lifetime of molds)

8) City delivery molds (where to deliver the finished molds) so we can give you a price turnkey.

9) Drawings of your details in the following 3D formats, best if this format STP, but it is possible and STL or X_T

Finally, it is desirable to know!!!


Your target price (the budget for the production of molds). Surely you understand, what you want and how many are willing to pay for it. Чтобы мы с могли точно определить, how to make molds. To fit your requirements and your financial capabilities together: price / quality / capabilities.

Отправьте пожалуйста ваш полноценный запрос на получение стоимости изготовления Пресс Формы для Термопластавтоматов под ключ.

After you send the necessary information, we will contact you by phone or e-mail soon.


Производство Пресс Формы для Термопластавтоматов
<font><font>Цена</font></font>, Quality and Manufacturing terms.

THE PRICE IS LOWER


FROM $5.000 BEFORE $100.000 Depending on the complexity DESIGN Molds

DATES SOON


1 MONTH BEFORE MAKING FIRST TRIAL DETAILS IN A NEW FORM PRESS

QUALITY ABOVE


HIGH QUALITY molds with a guarantee
FROM 300.000 BEFORE 1.000.000 SMIKANİY

ПРОЦЕСС СОТРУДНИЧЕСТВА И ПРОИЗВОДСТВА ПРЕСС ФОРМЫ ДЛЯ ТЕРМОПЛАСТАВТОМАТОВ

Upon receipt of your form information about the press, and calculate the cost you pay a small prepayment, to confirm your intention about the interest in the purchase order.

next payment 40% от заранее оговоренной стоимости вы оплачиваете вначале производства Пресс Формы,

Rest 50% от стоимости пресс формы вы оплачиваете перед отправкой готовой проверенной Пресс Формы для Термопластавтоматов из Китая.

1


YOU
PROVIDE 3D DRAWING
YOUR DETAILS

2


<font><font>[Объект Window]</font></font>
PRESS FORM

3


WE
MAKE THE ITEM FOR RECONCILIATION
THE NEW PRESS FORM

4


YOU
CHECK THE QUALITY OF MANUFACTURED
DETAILS

5


YOU
GET YOUR NEW Mold

Расчет стоимости Пресс Формы для Термопластавтоматов из Китая — экономь с нами от $5.000 before $100.000

Please take more seriously the provision of necessary information for the calculation of molds and complete the application form.

If you were unable to use the application form, then you can send your information on the molds to our email: support@gtgroup.company
Our manager will contact you to specify all the necessary information.

We provide all the information requested. В самые кратчайшие сроки вы сможете получить стоимость и сроки изготовления Пресс Формы для Термопластавтоматов под ключ с доставкой на ваше производство.


МЕТОДЫ ДОСТАВКИ ПРЕСС ФОРМЫ ДЛЯ ТЕРМОПЛАСТАВТОМАТОВ ИЗ КИТАЯ

BY AIR

AIRFREIGHT IS THE FASTEST WAY OF DELIVERY OF THE GOODS FROM CHINA TO RUSSIA. COMPLETION OF GOODS IN RUSSIA ARE NOT MORE 15 CALENDAR DAYS.

BY LAND

TRANSPORTATION GROUND TRANSPORTATION FROM CHINA, AVTOFURGONAMI.
COMPLETION OF GOODS IN RUSSIA ARE NOT MORE 25 CALENDAR DAYS.

BY SEA

OCEAN FREIGHT FROM CHINA THE BUDGET OPTION.
COMPLETION OF GOODS IN RUSSIA ARE NOT MORE 45 CALENDAR DAYS.

OUR TEAM

ПРЕСС ФОРМЫ ДЛЯ ТЕРМОПЛАСТАВТОМАТОВ
Geydarov Tural
CEO
ПРЕСС ФОРМЫ ДЛЯ ТЕРМОПЛАСТАВТОМАТОВ
Sergey Razin
Chief of Administration

Certificate of registration
GTgroup.Company

НАШИ ПРЕИМУЩЕСТВА ПЕРЕД ДРУГИМИ КОМПАНИЯМИ В ПРОИЗВОДСТВЕ ПРЕСС ФОРМЫ ДЛЯ ТЕРМОПЛАСТАВТОМАТОВ ИЗ КИТАЯ

PRODUCTION TIME

FROM 1 BEFORE 2 MONTHS BEFORE MAKING THE FIRST TRIAL DETAILS
BEFORE 3 MONTHS BEFORE MAKING DETAILS ARE ON YOUR PRODUCTION

PRICE MOULDS

ПРЕСС ФОРМЫ ДЛЯ ТЕРМОПЛАСТАВТОМАТОВ ИЗ КИТАЯ НА 50% CHEAPER RUSSIAN MANUFACTURERS

GUARANTEE OF QUALITY

HIGH QUALITY MOULDS WITH A GUARANTEE TO 1 000 000 SMIKANİY

SECURITY

You will work with a company that has experience MORE 10 YEARS ON THE MARKET

Solid experience and own foundry

TENS manufacturing molds

Hundreds of satisfied customers

MILLIONS OF CASH SAVINGS FOR CUSTOMERS


WE HAVE BEEN MANUFACTURING AND RASTOMAZHIVAEM are taking SAMI

Russian-speaking specialists Chinese speaking like a native. No language barrier

Rapid response to changes in design

DELIVERY TO ALL REGIONS OF RUSSIA ON THE ENTERPRISE CUSTOMER FOR FREE

What are your questions we will address!

Мы закажем Пресс Форму для Термопластавтомата и полностью проконтролируем ее производство, затем вы получите свой высококачественный готовый продукт у себя на производстве


Чтобы вы получили необходимую вам Пресс Форму, its design must be carefully coordinated with the Chinese experts in their language.

Our company has a staff of professionals who are fluent in Chinese and Russian languages, are free to negotiate with any of the Chinese manufacturers, all the technical details that should be considered, in the manufacture of molds, to the output from it you will receive the necessary detail to you.

Почему пресс формы для Термопластавтоматов из Китая лучше заказать у нас?


For many years, our company manufactures various products on the Chinese manufacturing plants. We have studied this very well how to make a profitable niche product in China.

The fact, что сами заводы производители китайской Пресс Формы не обладают полным комплексом услуг от поставщика до клиента в прочем как и любые другие заводы, by reason of, that they mostly target only mass production and do not have their own sales departments.

For this reason, they work through intermediaries or sales offices of trading companies, those who you do calculations or offers molds. And everything now depends on the appetite of the one who offers it to you.

Any other Chinese mediator, «поставщик Пресс Формы для Термопластавтоматов», specializing in this niche, makes up 300% his margin only in the mold. Then you just still have to pay for shipping and customs clearance, Plus intercede with document, test and give it to save on production, as additionally paid a good amount of third party companies.

We, you order the press form in one place, we will solve all the issues throughout the production process, вы получите у себя на производстве готовую высококачественную Пресс Форму для Термопластавтоматов под ключ.


GTgroup. Company more 10 years without intermediaries, It opens directly orders for manufacturing of mold factories in China. We ourselves have our own foundry in Russia on molding of plastic parts, spare parts for cars, to which the same for himself order the molds from China.

Так же мы открываем заказы на изготовление Пресс Форм для Термопластавтоматов из Китая для нужд других компаний. We agree with the producers, themselves are taking, and customs clearance molds from China, at the same time we do not have to pay for the huge cost of maintaining large companies and industries.

Поэтому наши цены на Пресс Формы для Термопластавтоматов многих удивляют! Так же мы можем предоставить вам партнерство и цены на Пресс Формы которые будут устраивать даже ваших клиентов.

What do you need, для получения расчета стоимости Пресс-Формы ,so we can provide you with the most complete and accurate information for your mold


You need to have a 3d drawings (3d model file) your details, in 3d format is best if it is STP format, so it is possible to X_T or STL formats and complete the application form on the calculation of the molds from China, can for this use the button below.

REVIEWS OF SOME OF OUR PARTNERS

logem
olmitool
"Great guys! We always cooperate with gtgroup. company, especially in matters relating to production, purchase or delivery of goods from China, I trust this company because they do not fail and lead to the end of the case started. "
Rashad SuleymanovCeo Logem Autoparts
http://logem.ru/
"We look forward to continued cooperation and recommend« GTGROUP.COMPANY », as a reliable partner in providing transportation and logistics services for the delivery of machines from China ... "
Anton EgorovCeo ORKEN TEK
http://olmitool.ru/

WHY? ПРЕСС ФОРМЫ ДЛЯ ТЕРМОПЛАСТАВТОМАТОВ ИЗ КИТАЯ ДЕШЕВЛЕ, Quality and fast on terms of manufacturing

There is a positive trend for production in China of the products or their components, one way or another connected with the original time consuming production processes.

Manufacturing molds and falls under the category of sophisticated metalworking. Such work is extremely advantageous to good high-tech CNC equipment, at minimal cost, to get high quality.

Посмотрите небольшое видео о современных технологиях в обработки металла при производстве Пресс Формы для термопластавтоматов из Китая.


Цена Пресс Формы для Термопластавтоматов из Китая как и у всех остальных продуктов производства складывается из затраченных на производство ресурсов. In addition to the costs for raw materials and other things, presence plays an important role of the human factor and production time, that significantly affect the price of the product.

The more time and effort spent by people on the production of the product, the more the final buyer will have to spend money on its acquisition. And it is important not only price, but the quality of the.

Почему Пресс Формы для Термопластавтоматов из Китая дешевле?


Цены высококачественных Пресс Форм и Штампов любой сложности под ключ, the Chinese manufacturer can be on 50% cheaper than Russian manufacturers. The reason they have the plants, equipped moschny, modern processing equipment with CNC control. Что значительно влияет на уменьшение стоимости Пресс формы для Термопластавтоматов из Китая.
Most of the things in the world producing, unfortunately it is not subject to a person who has in his arsenal of tools of the last century, to produce something quickly and efficiently. ie. in a short time and with minimal effort. And if somewhere in the opposite, if you want or need to want to overpay. And to pay for the time and labor of the people is always right!

Ваш верный курс на изготовление Пресс Формы для Термопластавтоматов — Китай.


Due to the absence of any technological advances and basic automation. The final consumer of any product produced in Russia. We have to give a lot of money, due to investments in the manufacturing process, finance and labor large groups of people. Which produce a particular product. And the more people are involved in the process of obtaining the desired product by the customer. The more the customer has to pay.
Пресс формы — вполне могут быстро и качественно произведены с минимальными сроками и вложениями человеческого ресурса. And it can only be on powerful CNC equipment and the presence of high-quality production tools!.

If it is not possible to buy so expensive, or no desire to own production, that can be a very risky business in Russia because of the risk of bankruptcy. Then you can always order all you need, on already existing enterprises, equipped with modern equipments. Such as milling CNC machining centers in China.

Automation! - there is no need to pay for the time and labor of many people!


Company GTGROUP. COMPANY more 13 years a successful and profitable activity for its clients, which is a metal processing in China, and not just for customers, but also for its industrial or commercial needs.
For quite some time we carry out production and wholesale deliveries to Russia auto parts for foreign cars, molds of any complexity and other SPARE PARTS kits for equipment import and Russian brands, that require metalworking or other exact works.

We can be useful, to address your questions in orders and delivery details, source, consumables, molds for plastic or rubber pressure, as well as stamps for all needs. Produce goods in China is very profitable Russian entrepreneur, because a large proportion of things that fall on the RUSSIAN market, does not have the technical ability to be produced in Russia or it turns out to be unprofitable.

Пресс Формы для Термопластавтоматов из Китая любых сложностей массой от 20 kg to 80 tonnes

ПРЕСС ФОРМЫ ДЛЯ ТЕРМОПЛАСТАВТОМАТОВ
пресс-формы-из-китая-на-50-дешевле-российских-производителей

10 years ago


International trade and logistics group of companies «GTGROUP. COMPANY» more 12 years working in the Russian market. We provide the Dropship wholesale from China to Russia the broadest range of products, of trading companies and Chinese manufacturers. The company was founded in 2003 Geydarov by Tural.

Initially, GTGROUP.COMPANY activity is the import of goods from China to Russia exclusively for own needs of the company. And to be able to carry out the delivery and customs clearance of goods through their own efforts. At the same time reduce the cost of goods to the Russian market, properly performing transport not overpaying for brokerage. To this end, during the first few years of the company, It was organized by a number of offices, in China and Russia.

Nowadays


GTGROUP.COMPANY company has a number of reliable partners, that are part of GTGROUP, who are willing to bring the goods from China in any advantageous way to deliver. GTGROUP. COMPANY was prepared to find, purchase, produce and bring your desired goods from China.

At the moment, the company has partners in different cities of China (Ruiân′, Beijing, Guangzhou) and Russia (Moscow, Ulyanovsk, Togliatti, Vladivostok, Izberbash). More than 12 years the company has been able to gain a lot of experience in foreign trade activities and international wholesale. It is also able to study, the ins and outs of this sector. Including pitfalls, How to buy wholesale products from China, What can I bring back from China, and how to bring cheaper goods from China to remain always in profit and get the competitive price of the goods for the Russian market.

OUR CONTACTS

Limited Liability Company "GT GROUP"
433400 Ulyanovsk region., Cherdaklinsky rn., r.p.Cherdakly, str. 32 The Soviet
wire. +7 495 118 26 27
INN 7329021840
OGRN 1167325061936
email: support@gtgroup.company
Яндекс.Метрика